|Sizes||DN6 to DN50 ( NPS ¼ to NPS 2)|
|Pressure Rating||Class 150 & PN10 / PN 16|
|Material Construction||Cast Carbon Steel – WCB, WCC, etc.
Low Carbon Steel – LCB, LCC, etc.
Austenitic Stainless Steel – CF8, CF8M, CF3, CF3M, CN7M, CG3M, etc.
Duplex Stainless Steel – CD4MCuN, CD3Mn, etc.
Ductile Iron – Grey Cast Iron, S.G. Iron, etc.
Fabricated – Carbon Steel, etc.
|Design & Manufacturing Standard||MSS SP 81|
|Face to Face Std.||MSS SP 81|
|End Connection Std.||MSS SP 81 / Flanged Ends as per ASME B16.5 & ASME B16.10, PN 10 / PN 16 & TABLE – D & TABLE – E|
|Testing Standard||API 598 / BS 6755 PART-I|
|Type of Bore||Standard (Full Bore)|
|End Connection Type||Wafer Type, Lugged Type, Flanged Ends, etc.|
|Seat Design||Integral Metal Seated, Integral Weld Deposited,
Replaceable Metal Seated,
Replaceable Soft Seated as like, PTFE, RPTFE, EPDM, Nitrile, Viton, etc.
|Operated Type||Hand Wheel, Chain Wheel, Gear, Pneumatic Cylinder, Electric Actuator, & Hydraulic cylinder etc.|
We manufacture specific design Knife Edge Gate Valve which is highly demanded in the market and ensures minimum contact between the parts of valve and reduces abrasion. Its most unique feature is its excellent performance. There are various options available on gate, seat and wear ring. The Block edge of the Knife valve allows the tense shut off even if the solid particles settle at the bottom.
The valves are normally used for varied applications like paper and pulp mills, and various powders such as coal, ash, dry and wet powder in power houses, material handling equipment’s and dust collecting systems. These valves are commonly used for liquid slurries and fiber applications and which does not allows leakages.
Our product range covers valves of sizes up to 36” [900mm] and ASME classes up to 150, PN 10 and PN 16. Based on customer requirements, valves in different pressure classes, larger sizes and other materials are also offered. We manufacture this Valve according to MSS SP – 81 designing and manufacturing standards. And these are some of the type of knife gate valve available.
- Uni-directional Type Knife Gate Valve
- Bi-Directional Type Knife Gate Valve
- Square & Rectangle Type Knife Gate Valve
- Fabricated Type Knife Gate Valve
Bi-Directional Knife Gate Valve Manufacturer
Knife Edge Gate Valve Manufacturers, Knife Gate Valve, Exporter, Supplier, Stockiest, Importer. Slide Gate Valve, Knife Gate Valve Manufacturer, Exporters.
Cast Iron, Ductile Iron, Cast Carbon Steel, Authenticate Stainless Steel, Duplex Steel, Super Duplex Steel, Alloy 20, Hastelloy Material Knife Gate Valves.
- Bi-Directional Knife Gate Valve with Metal Seat and Renewable Soft Seal / Elastomer Seat / PTFE Seat
- Rising Stem Knife Gate Valve (Wafer Type, Full Lug Type Body)
- Non-Rising Stem Knife Gate Valve (Wafer Type, Full Lug Type Body)
- Unidirectional Knife Gate Valve with Metal Seat and Renewable Soft Seal / Elastomer Seat / PTFE Seat
Axegic Group Inc is one the leading manufacturer and exporter of Knife Edge Gate Valve, Square Type Knife Edge Gate Valve, Bi-directional knife gate valve, Uni-directional knife gate valve to Dubai, Kuwait, Kingdom of Saudi Arabia, Jeddah, Jubail, Malaysia, Thailand, Singapore, Australia, Brazil, Italy, Romania, Azerbaijan, Sharjaha, Abu Dhabi, United Arab Emirates, Egypt, Turkey, Sri Lanka, Yemen, Pakistan, Bahrain, Indonesia, Zambia, Uganda, Netherlands, Philippines, Vietnam, Dominican Republic, Oman, West Africa, Finland and Jordan.
Knife Gate Valve Manufacturer
Axegic Group is leading manufacturer, supplier and exporter of Knife Gate Valve in Unidirectional and Bi-Directional type which is mostly used in service of isolation and on-off service. Knife Gate Valve is mostly applied to handle highly viscous powder or slurry variety to cut throughout and close the valve. The valve sliding plate (gate) has a knife-edge, so it is called Knife Gate Valve or Knife Edge Gate Valve which both are the same. Previously it was mostly used in the service of Powder, Slurry, Pulp and Paper Mill now it uses in many more industrial applications. Some user also asks for Square Type Knife Edge Gate Valve, Bi-directional knife gate valve and Uni-directional knife gate valve in place of Knife Edge Gate Valve.
Each knife edge gate valve body design is a single-piece cast heavy-duty construction with lapped and seat integral or renewable type as customer request. Knife Gate Valve has a very simple construction and assembly with very few parts like body, Knife Gate, Seat, Gland Flange, Gland Packing and Yoke.
Axegic Group is the leading manufacturer and exporter of Knife Gate Valve, Square Type Knife Edge Gate Valve, Bi-directional knife gate valve and Uni-directional knife gate valve to Dubai, Kuwait, Kingdom of Saudi Arabia, Jeddah, Jubail, Malaysia, Thailand, Singapore, Australia, Brazil, Italy, Romania, Azerbaijan, Sharjah, Abu Dhabi, United Arab Emirates, Egypt, Turkey, Sri Lanka, Yemen, Pakistan, Bahrain, Indonesia, Zambia, Uganda, Netherlands, Philippines, Vietnam, Dominican Republic, Oman, West Africa, Finland and Jordan.
Advantages of Knife Gate Valve
- Low cost
- Fast production
- Easy to operate
- Easy Installation
- Easy to repair
- Best performance in viscous, slurry, pulp and powder application
- Wide choice of operation
Applications of Knife Gate Valve
- Pulp Mill
- Paper Industries
- Sludge Line
- Power Plant
- Cement Plant
- Steel Plant
- Food Industry
- Textile Industries, Polyester, Rayon Plant
- Chemical Process Plant and Industries
- Fertilizer Plant
- Abrasive Slurry
- Dams and Hydro Power Plant
- High-Density Slurry Pipeline
- Dry Solid and Powder Service
- Effluent Treatment Plant (ETP)
- Waste Water Treatment Plant
- Waste Beverages and Food Process Pipeline
- Viscous Media Service
- Mineral Industries